FORM-LINE FOR PRECAST

Form liners for architectural concrete by PLASMACEM
Using form liners for architectural concrete allows you to:
• Create patterns on exposed concrete walls.
• Adapt buildings to meet all aesthetic needs.
• Obtain even surfaces in a simple and cost-effective manner, thanks to the play of light and shadow that can be generated.

The most important parameters to bear in mind are:
• The precise number of form liners to assemble.
• The design to comply with (continuous mounting or positioning of joints).
• Dimensions adapted to the formwork to be used.
• Type of form liner suited to the number of expected reuses and the field of use.

FLEX
Form liner for pre-casting
• form liners in sintered polyurethane (FLEXIBLE).
• 50 - 100 reuses.
• can be used without fixing.
• magnetic anchoring possible on pre-cast benches.

ESSEFLEX
Form liners for large panels:
• form liners in material derived from silicon at noble catalysis (FLEXIBLE).
• 100 reuses.
• no size limit.
• can be used without fixing.
• magnetic anchoring possible on pre-cast benches.

To achieve the best results, we recommend that you:
• Use class S4 concrete and a suitable superplasticizer.
• Use a concrete recipe suitable for exposed surfaces.
• Store in a dry place protected against direct exposure to frost, sun, and rain.

The form liners by Plasmacem are delivered to size taking into account the information on construction site requirements.
The dimensions of the products delivered are guaranteed with a tolerance of ± 0.5%.
The concrete release must take place within 24 hours of the casting.